Checkline MLT Bedienungsanleitung

042.920.00013.11.07BetriebsanleitungOperating InstructionsInstructions de serviceInstrucciones de usoIstruzioni per l’usoKullanma KýlavuzuInstruções d

26 OperationMeasuring the yarn length Connecting the MLT WESCO to the revolution sen-sor. Apply a short press to the rotary knob to access the "

27englishOperationSelecting the Yarn Tension measu-ring modes Apply a short press to the rotary knob to access the "selection menu": MACH

28OperationDisplaying the last or the penultimate measured value Turn the rotary knob to select "MEM" on the display. The last measuring va

29englishOperationMeasuring the yarn speed Apply a short press to the rotary knob to access the "selection menu": MACHINE SPEED YARN LEN

30OperationCalibrationThe calibration set is used to check the correct yarn tension and to correct it if necessary. For calibration purpo

31englishMaintenanceThe following instructions must be observed: The batteries must not be opened or thrown into  Replaced batteries must be a

32Maintenance Retain the swivel arm (2). Disengage the swivel arm release handle (5). The swivel arm release handle (5) is hinged down, to provide

33englishTechnical DataPower supply: Rechargeable nickel-metal-hydride battery, 1.2 V, type Mignon AA or 2 dry batteries, type Mignon 1.5

34Declaration of Conformityin accordance with the Machinery Directive (98/37/EC), Annex II A in accordance with the Low Voltage Directive (73/23/EC)

18Preface / IndexPrefaceWe are pleased that you selected a MEMMINGER-IRO product. The more familiar you make yourself with this product, the better th

19englishSafety NotesThe MLT WESCO yarn meter has exclusively been designed for measuring the yarn infeed and the yarn ten-sion in textile machines.We

20Accessories Supplied / FunctionAccessories SuppliedThe MLT WESCO yarn meter is supplied together with the following components:1 - MLT WESCO yarn

21englishUnit Components165432Unit ComponentsThe MLT WESCO offers four selectable MEASURING MODES: MACHINE SPEED YARN LENGTH YARN TENSION YARN SPE

22Switching the MLT WESCO off Press the rotary knob (4) for approx. 2 seconds. "OFF" is shown on the display. The MLT WESCO is switched o

23englishmax. 5 mmNOTE!The Symbol is shortly shown in the display at each machine revolution, when the magnet passes the revolution sensor. Connecti

24NOTE!During the measuring process, the MLT WESCO must be held still and straight.ATTENTION!The measuring process is stopped as soon as the swivel ar

25englishMeasuring the machine speed Connect the MLT WESCO to the revolution sensor. Apply a short press to the rotary knob to access the "sele