Checkline EMS4 Bedienungsanleitung PDF herunterladen (Seite 8)

Regardless of the type of connected device (Quadrature or Digimatic) there are several settings that are

always available. These settings are summarized in the following list:

Setting

Notes

Channel Enabled

Enables/Disables channel. Disabling a channel will hide it from the main display.

Gage Type

Selects the channel function between Quadrature and Digimatic modes.

Unit Type

Selects measurement unit between Inch, Millimeter, and Hidden

Mode

Selects indication mode between Incremental (default), Absolute, and Total

Indicated Runout (TIR). TIR is only available for Quadrature Devices

Absolute Offset

Entry of absolute offset (ABS mode only)

Travel Direction

Selects between forward and reverse travel direction.

Tolerance

Enables/Disables tolerance mode. If this mode is enabled, the analog indication

for this channel will turn red when the measurement falls outside of the

specified bounds.

High Tolerance

Sets the maximum allowable tolerance value for this channel.

Low Tolerance

Sets the maximum allowable tolerance value for this channel.

Ratio Mode

Ealig Ratio ode ill sale the uet alue  the alue of the Ratio

Value settig.

Ratio Value

Scale multiplier for current gage measurement.

Automatic Log

Enables automatic data logging on an interval

Log Interval (s)

Sets the logging interval if Automatic Log is enabled

Show Analog Scale

Enables display of the analog scale in addition to the readout value

Analog Scale

Selects the maximum value to display on the analog scale readout.

Show Leading Zero

Enables/Disables leading zeros on current measurement.

Quadrature Devices

By default, channels are set up in quadrature mode, which provides a real-time display of the current

idiato’s easueet. The following settings are only available for quadrature channels:

Setting

Notes

Hold

Turns on/off hold mode for this chancel. This setting can be accessed by

pessig the Hold button for the current channel on the main screen.

Hold Mode

If Hold is enabled, this setting selects between the available hold modes: Min,

Max, and Freeze

Encoder

Resolution

Set the Encoder Resolution of the device fo eaple .5 o .

Encoder Unit Type

Selects the unit type of the encoder glass scale (Metric or Imperial)

Resolution

Sets the display resolution of the remote display

Show Min/Max

Enables display of min and max readings in addition to the readout value

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

Checkline EMS4 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Checkline EMS4