Checkline ETW Bedienungsanleitung PDF herunterladen (Seite 3)

 Electromatic Equipment Co., Inc.

-18-

Wrench Span and units - Change these and tool must be re-calibrated

5.4 Set a Preset using the PCFE

1. Ensure the wrench is

connected to the PCFE

software

2. Select the preset number or

location from 1 to 99 you wish

to set

3. When the pop up window

appears, fill in required fields

and press OK

4. Select Store to wrench and the

data is written to the wrench

5. Select Preset option on the

wrench and select the preset

required

 Electromatic Equipment Co., Inc.

-3-

1.3 Care Guidelines

These Instruments should be handled with care. Do not subject to Torque Loads in

excess of the Model Range. Do not use Tool to loosen fasteners tightened beyond

Max Tool Capacity - Never apply extensions to Tool without contacting your

supplier.

Do not Drop or Subject to Impact Blows - Provide adequate storage to Protect from

Damage - Adhere to Safety Instructions

Changing the Battery on Wrenches - Note: Battery life should last 160hrs+

1. Unscrew the metal End Cap on the handle of the wrench.

2. Remove the four AAA cell batteries and replace with new.

3. Screw back the metal End cap.

4. Check to ensure the date and time are correct

Ratchet head guidelines

1. Store in a dry location

2. Oil Frequently to prevent Ratchet head seizing

3. Do not exceed specified torques

4. Do not use external forces on Ratchet ( i.e. Hammer)

Max Torque for 1/4" Ratchet = 30 Nm

Max Torque for 3/8" Ratchet = 135 Nm

Max Torque for 1/2" Ratchet = 340 Nm

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

Checkline ETW Bedienungsanleitung Seite 3